FI168L062005-T [TAIYO YUDEN]
Ferrite Chip, 1 Function(s),;
| 型号： | FI168L062005-T |
| 厂家： | 
TAIYO YUDEN (U.S.A.), INC |
| 描述： | Ferrite Chip, 1 Function(s), |
| 文件： | 总18页 (文件大小：1592K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
[ For General Electronic Equipment
(General Environment) ]
Notice for TAIYO YUDEN Products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2017. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■ Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■ Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and medical equipment classified as Class I or II by IMDRF. Please be
sure to contact TAIYO YUDEN for further information before using the products for any equipment which may
directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information
network equipment including, without limitation, telephone exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■ Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■ Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■ The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter“TAIYO YUDENs’official sales channel”). Please note that the contents of this
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’s official sales
channel.
■ Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to“U.S. Export
Administration Regulations”,“Foreign Exchange and Foreign Trade Control Law”of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
1
MULTILAYER CERAMIC DEVICES / DIPLEXERS / 2 BRANCH COUPLER
REFLOW
■PARTS NUMBER
△＝Blank space
F
I
△
②
2
1
2
B
2
4
5
0
2
6
-
T
①
③
④
⑤
⑥
⑦
①Series name
⑤Frequency
Code
Code
ＦＩ
Series name
Frequency［MHz］
（example）
2450
High frequency devices
2400～2500
470～770
②Electrode code
0620
Code
△
Electrode code
With plating
⑥Spec code
Code
Spec code
③Dimensions
01～
Individual spec
Code
212
Dimensions［mm］
2.0×1.25
⑦Packaging
Code
Packaging
Taping
168
1.6×0.8
-T
105
1.0×0.5
④Special code
Code
B
Special code
Band pass type
Low pass type
Balance type
Diplexer
L
C
P
W
2 Branch coupler
Dual type
D
■EXTERNAL DIMENSIONS / STANDARD QUANTITY
FI 212B type FI 212B190223
FI 212L type
FI 212C245033
2.0±0.15
0.9±0.10
2.0±0.15
0.9±0.10
2.0±0.15
0.5max.
2.0±0.15
0.9±0.10
IN
GND
GND
(7) (6) (5)
IN
OUT
GND
GND
IN
OUT
GND
(8)
(4)
GND
OUT
GND
(1) (2) (3)
0.65±0.20
0.3±0.20
1.6±0.20
1.6±0.20
0.4±0.20
FI 168B/L type
FI 212C type
FI 212C245075
FI 212P type
2.0±0.15
0.9±0.10
1.6±0.10
0.5max.
2.0±0.15
0.9±0.10
2.0±0.15
0.7max.
(6) (5) (4)
GND
(7) (6) (5)
(7) (6) (5)
IN
OUT
(8)
(4)
(8)
(4)
(1) (2) (3)
GND
(1) (2) (3)
(1) (2) (3)
0.65±0.20
0.65±0.20
0.65±0.20
0.3±0.20
0.7±0.10
0.3±0.20
0.3±0.20
FI 168D type
FI 168P type
FI 105B/L type
FI 168W type
1.6±0.10
0.45max.
1.6±0.10
0.65max.
1.6±0.10
0.5max.
1.00±0.05
0.4max.
(6) (5) (4)
(6) (5) (4)
(7) (6) (5)
GND
(8)
(4)
IN
OUT
(1) (2) (3)
(1) (2) (3)
(1) (2) (3)
GND
0.50±0.15
0.50±0.15
0.2±0.1
0.50±0.15
0.10±0.05
0.30±0.10
0.2±0.15
0.2±0.15
Unit:：mm
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
1
152
FI 168L****G* type
1.6±0.10
FI 168L0628M4
FI 212P****G* type
0.65max.
2.0±0.15
0.9±0.10
1.6±0.10
0.65max.
(1) (2) (3)
(1) (2) (3)
(6) (5) (4)
(6) (5) (4)
(1) (2) (3)
0.65±0.10
0.60±0.10 0.60±0.10
0.50±0.15
(6) (5) (4)
(1) (2) (3)
0.30±0.10
(1) (2) (3)
0.05typ
0.30±0.10
0.30±0.10
0.2±0.10
0.3±0.10
0.40±0.10
Unit：mm
FI 212P089208
FI 212P085912
GND
FI 212P089213
FI 212P085909
FI 212C2450**
(1) Balanced
FI 212P****G* type
GND
Low Band
GND
(2) GND
(3) Balanced
(4) GND
(5) Unbalance
(6) DC
Common Port
GND
Common Port
GND
High Band
GND
High Band
GND
Low Band
GND
Common
GND
Low Band
-
High Band
(7) NC
-
-
-
(8) GND
-
-
FI 168P245030
FI 168D087018
High Band IN
GND
FI 168P157519
FI 168W type
RF1 IN/OUT
CPL2 RF1
CPL2 RF2
GND
FI 168L****G* type
FI 168L0628M4
(1) GND
GND
RF IN/OUT
I/O Port
GND
I/O Port
GND
GND
GND
-
(2) Common
(3) GND
High Band
GND
Low Band IN
Low Band OUT
GND
Common
RF IN/OUT
(4) Low Band
(5) GND
Low Band
-
-
-
-
-
-
-
-
-
RF2 OUT/IN
CPL1 RF2
CPL1 RF1
GND
(6) High Band
High Band OUT
-
(7)
(8)
-
-
-
-
Type
212B
212L
212C
212P
168B
168L
168D
168P
168W
105B
105L
Standard quantity［pcs］
3000～6000
4000～8000
10000
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
1
153
■PARTS NUMBER
●Multilayer device band pass type
Applications
External dimensions ［mm］
2.0×1.25×1.0max.
2.0×1.25×1.0max.
1.6×0.8×0.5max.
Part number
FI 212B245026
FI 212B245027
FI 168B245001
FI 105B245024
FI 212B190223
2.4GHz W-LAN / Bluetooth ®
PHS
1.0×0.5×0.4max.
2.0×1.25×1.0max.
●Multilayer device low pass type
Applications
External dimensions ［mm］
1.6×0.8×0.45max.
1.0×0.5×0.4max.
Part number
Digtal TV
FI 168L062005
FI 105L250014
FI 105L087038
FI 168L0628M4
FI 168L2200G9
2.4GHｚ W-LAN / Bluetooth ®
1.0×0.5×0.4max.
Cellular
1.6×0.8×0.65max.
1.6×0.8×0.65max.
Applications
Other
External dimensions ［mm］
1.6×0.8×0.45max.
Part number
FI 168D087018
Notes
Dual band LPF
●Multilayer device balance type
Applications
External dimensions ［mm］
2.0×1.25×1.0max.
2.0×1.25×1.0max.
2.0×1.25×0.7max.
Part number
Notes
Bluetooth ®
FI 212C245033
FI 212C245036
FI 212C245075
Conjugated match to CSR BC3
Conjugated match to CSR BC5
Conjugated match to CSR BC5FM, BC6ROM
●Multilayer diplexer
Applications
W-LAN
External dimensions ［mm］
1.6×0.8×0.65max.
2.0×1.25×1.0max.
2.0×1.25×1.0max.
2.0×1.25×1.0max.
2.0×1.25×1.0max.
2.0×1.25×1.0max.
2.0×1.25×1.0max.
2.0×1.25×1.0max.
2.0×1.25×1.0max.
1.6×0.8×0.65max.
1.6×0.8×0.65max.
Part number
FI 168P245030
FI 212P082931
FI 212P0829G2
FI 212P082934
FI 212P082935
FI 212P089208
FI 212P089213
FI 212P085909
FI 212P085912
FI 168P157519
FI 168P157525
Cellular
GPS / 2.4GHｚ W-LAN
●Multilayer coupler
Applications
Cellular
External dimensions ［mm］
1.6×0.8×0.5max.
Part number
FI 168W1697B1
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
1
154
■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS
FI 212B245026
Pass band frequency
2400 - 2500 MHz
Insertion loss at pass band
2.6 dB max. (+25℃）
2.9 dB max. (-40～+85℃）
1.0 dB max.
Ripple at pass band
V.S.W.R. at pass band
Attenuation
2.0 max.
40 dB min. (800 - 960 MHz)
30 dB min. (1710 - 1990 MHz)
25 dB min. (2110 - 2170 MHz)
30 dB min. (4800 - 5000 MHz)
30 dB min. (7200 - 7500 MHz)
50 Ω
Impedance
FI 212B245027
Pass band frequency
2400 - 2500 MHz
Insertion loss at pass band
1.4 dB max. (+25℃）
1.7 dB max. (-40～+85℃）
1.0 dB max.
Ripple at pass band
V.S.W.R. at pass band
Attenuation
2.0 max.
30 dB min. (800 - 915 MHz)
30 dB min. (1710 - 1910 MHz)
6 dB min. (2110 - 2170 MHz)
20 dB min. (4800 - 5000 MHz)
FI 168B245001
Pass band frequency
2400 - 2500 MHz
Insertion loss at pass band
2.2 dB max. (+25℃）
2.5 dB max. (-30～+85℃）
1.0 dB max.
Ripple at pass band
V.S.W.R. at pass band
Attenuation
2.1 max.
25 dB min. (800 - 960 MHz)
25 dB min. (1710 - 1910 MHz)
20 dB min. (4800 - 5000 MHz)
20 dB min. (7200 - 7500 MHz)
50 Ω
Impedance
FI 105B245024
Pass band frequency
2400 - 2500 MHz
Insertion loss at pass band
3.0 dB max. (+25℃）
3.3 dB max. (-40～+85℃）
1.0 dB max.
Ripple at pass band
V.S.W.R. at pass band
Attenuation
2.2 max.
25 dB min. (800 - 960 MHz)
22 dB min. (1710 - 1910 MHz)
20 dB min. (4800 - 5000 MHz)
20 dB min. (7200 - 7500 MHz)
FI 212B190223
Pass band frequency
1884 - 1930 MHz
1.7 dB max. (+25℃）
2.0 dB max. (-30～+85℃）
1.7 dB max. (+25℃）
2.0 dB max. (-30～+85℃）
1.0 dB max.
Insertion loss at 1884 - 1920 MHz
Insertion loss at 1920 - 1930 MHz
Ripple at pass band
V.S.W.R. at pass band
Attenuation
2.0 max.
30 dB min. (1420 MHz)
18 dB min. (3768 - 3860 MHz)
50 Ω
Impedance
FI 168L062005
Pass band frequency
470 - 770 MHz
Insertion loss at 470 - 600 MHz
1.2 dB max. (+25℃）
1.3 dB max. (-30～+85℃）
2.2 dB max. (+25℃）
Insertion loss at 600 - 710 MHz
Insertion loss at 710 - 770 MHz
2.4 dB max. (-30～+85℃）
4.0 dB max. (+25℃）
4.4 dB max. (-30～+85℃）
1.4 dB max.
Ripple at 470 - 710 MHz
V.S.W.R.
2.0 max. (470 - 710 MHz)
2.5 max. (710 - 770 MHz)
25 dB min. (888 - 925 MHz) (+25℃)
21 dB min. (888 - 925 MHz) (-30～+85℃)
25 dB min. (940 - 960 MHz)
27 dB min. (1429 - 1453 MHz)
26 dB min. (1920 - 1980 MHz)
26 dB min. (2400 - 2500 MHz)
50 Ω
Attenuation
Impedance
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
1
155
■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS
FI 105L250014
Pass band frequency
2400 - 2500 MHz
Insertion loss at 2400 - 2500 MHz
0.45 dB max. (+25℃）
0.55 dB max. (-40～+85℃）
1.7 max.
V.S.W.R. at 2400 - 2500 MHz
Attenuation
21 dB min. (4800 - 5000 MHz)
21 dB min. (7200 - 7500 MHz)
50 Ω
Impedance
FI 105L087038
Pass band frequency
824 - 915 MHz
Insertion loss at 824 - 915 MHz
V.S.W.R. at 2400 - 2500 MHz
Attenuation
0.75 dB max. (-30～+85℃）
1.5 max.
23 dB min. (1648 - 1830 MHz)
23 dB min. (2472 - 2745 MHz)
50 Ω
Impedance
FI 168L0628M4
Pass band frequency
470 - 787 MHz
0
‐10
‐20
‐30
‐40
‐50
‐60
Insertion loss at pass band
0.5 dB max. (+25℃）
0.6 dB max. (-40～+90℃）
-
Ripple at pass band
V.S.W.R. at pass band
Attenuation
2.0 max.
26 dB min. (1429 - 1501 MHz)
30 dB min. (1565 - 1607 MHz)
35 dB min. (1570 - 1580 MHz)
18 dB min. (1920 - 1980 MHz)
S11
S21
0.4
0.8
1.2
1.6
2.0
2.4
2.8
Frequency [GHz]
Impedance
50 Ω
FI 168L2200G9
Pass band frequency
1700 - 2170 MHz
2170 - 2500 MHz
2500 - 2700 MHz
Insertion loss at 1700 - 2170 MHz
Insertion loss at 2170 - 2500 MHz
Insertion loss at 2500 - 2700 MHz
0.5 dB max. (+25℃）
0.55 dB max. (-30～+85℃）
0.65 dB max. (+25℃）
0.75 dB max. (-30～+85℃）
0.9 dB max. (+25℃）
1.0 dB max. (-30～+85℃）
10 dB min.
Return loss. at 1700 - 2700 MHz
Attenuation
25 dB min. (3400 MHz)
22 dB min. (3400 - 5400 MHz)
20 dB min. (5400 - 8100 MHz)
50 Ω
Impedance
FI 168D087018
Low band
Pass band frequency
Insertion loss at 824 - 915 MHz
V.S.W.R. at 824 - 915 MHz
Attenuation
824 - 915 MHz
0.6 dB max. (-30～+85℃）
1.5 max.
25 dB min. (1648 - 1830 MHz)
25 dB min. (2472 - 2745 MHz)
50 Ω
Impedance
High band
Pass band frequency
Insertion loss at 1710 - 1910 MHz
V.S.W.R. at 824 - 915 MHz
Attenuation
1710 - 1910 MHz
0.6 dB max. (-30～+85℃）
1.5 max.
25 dB min. (3420 - 3820 MHz)
25 dB min. (5130 - 5730 MHz)
50 Ω
Impedance
Isolation
In to In/Out to Out
27 dB min. (824 - 915 MHz)
30 dB min. (1710 - 1910 MHz)
30 dB min. (824 - 915 MHz)
30 dB min. (1710 - 1910 MHz)
In to Out
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
1
156
■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS
FI 212C245033
Pass band frequency
2400 - 2500 MHz
2.7 dB (+25℃）
Insertion loss at pass band
3.0 dB (-30～+85℃）
1.0 dB max.
Ripple at pass band
Unbalanced port V.S.W.R. at pass band
Balanced port V.S.W.R. at pass band
Amplitude Imbalance at pass band
Phase Imbalance at pass band
Attenuation
2.0 max.
2.0 max.
2.0 dB max.
180 ±10℃
25 dB min. (880 - 960 MHz)
15 dB min. (1710 - 1990 MHz)
15 dB min. (1990 - 2170 MHz)
15 dB min. (4800 - 5000 MHz)
50 Ω
Unbalanced port Impedance
Balanced port Impedance
Conjugated match to CSR BC3
FI 212C245036
Pass band frequency
2400 - 2500 MHz
3.7 dB (+25℃）
Insertion loss at pass band
4.0 dB (-30～+85℃）
1.0 dB max.
Ripple at pass band
Unbalanced port V.S.W.R. at pass band
Balanced port V.S.W.R. at pass band
Amplitude Imbalance at pass band
Phase Imbalance at pass band
Attenuation
2.0 max.
2.0 max.
2.0 dB max.
180 ±10℃
35 dB min. (880 - 960 MHz)
20 dB min. (1710 - 1990 MHz)
15 dB min. (1990 - 2170 MHz)
20 dB min. (4800 - 5000 MHz)
50 Ω
Unbalanced port Impedance
Balanced port Impedance
Conjugated match to CSR BC5
FI 212C245075
Pass band frequency
2400 - 2500 MHz
Insertion loss at pass band
3.7 dB (+25℃）
4.0 dB (-30～+85℃）
1.0 dB max.
Ripple at pass band
Unbalanced port V.S.W.R. at pass band
Balanced port V.S.W.R. at pass band
Amplitude Imbalance at pass band
Phase Imbalance at pass band
Attenuation
2.2 max.
2.2 max.
2.0 dB max.
180 ±10℃
40 dB min. (880 - 960 MHz)
18 dB min. (1710 - 1990 MHz)
12 dB min. (1990 - 2170 MHz)
30 dB min. (4800 - 5000 MHz)
50 Ω
Unbalanced port Impedance
Balanced port Impedance
Conjugated match to CSR BC5FM, BC6ROM
FI 168P245030
Low band
Pass band frequency 1
Pass band frequency 2
Insertion loss at Pass band 1
Insertion loss at Pass band 2
V.S.W.R. at Pass band
Attenuation
1558 - 1610 MHz
2400 - 2500 MHz
0.50 dB max.
0
-10
-20
-30
-40
-50
-60
0.60 dB max.
2.0 dB max.
24 dB min. (4800 - 4900 MHz)
26 dB min. (4900 - 6000 MHz)
50Ω
Impedance
Common Rlo
High Band
Low Band
0
2
4
6
8
10
12
14
16
18
High band
Frequency. [GHz]
Pass band frequency
Insertion loss at Pass band
V.S.W.R. at Pass band
Attenuation
4900 - 5950 MHz
0.80 dB max.
2.0 dB max.
32 dB min. (30 - 2700 MHz)
50Ω
Impedance
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
1
157
■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS
FI 212P082931
Low band
Pass band frequency 1
698 - 894 MHz
Pass band frequency 2
880 - 960 MHz
Insertion loss at 698 - 894 MHz
0.50 dB max. (+25℃）
0.60 dB max. (-40～+85℃）
0.70 dB max. (+25℃）
0.80 dB max. (-40～+85℃）
2.0 max.
Insertion loss at 880 - 960 MHz
V.S.W.R. at 698 - 894 MHz
V.S.W.R. at 880 - 960 MHz
Attenuation
2.0 max.
13 dB min. (1420 - 2690 MHz)
50Ω
Impedance
High band
Pass band frequency 1
Pass band frequency 2
Pass band frequency 3
Pass band frequency 4
Insertion loss at 1420 - 1520 MHz
1420 - 1520 MHz
1560 - 1610 MHz
1710 - 2170 MHz
2300 - 2690 MHz
0.70 dB max. (+25℃）
0.80 dB max. (-40～+85℃）
0.50 dB max. (+25℃）
0.60 dB max. (-40～+85℃）
0.50 dB max. (+25℃）
0.60 dB max. (-40～+85℃）
0.50 dB max. (+25℃）
0.60 dB max. (-40～+85℃）
2.0 max.
Insertion loss at 1560 - 1610 MHz
Insertion loss at 1710 - 2170 MHz
Insertion loss at 2300 - 2690 MHz
V.S.W.R. at 1420 - 2690 MHz
Attenuation
13 dB min. (698 - 960 MHz)
50Ω
Impedance
FI 212P0829G2
Low band
Pass band frequency
Insertion loss at 698 - 960 MHz
698 - 960 MHz
0.27 dB max. (+25℃）
0.32 dB max. (-40～+85℃）
2.0 max.
V.S.W.R. at 698 - 960 MHz
Attenuation
13 dB min. (1710 - 2690 MHz)
50Ω
Impedance
High band
Pass band frequency
Insertion loss at 1710 - 2690 MHz
1710 - 2690 MHz
0.45 dB max. (+25℃）
0.55 dB max. (-40～+85℃）
2.0 max.
V.S.W.R. at 698 - 960 MHz
Attenuation
19 dB min. (698 - 960 MHz)
50Ω
Impedance
FI 212P082934
Low band
Pass band frequency
Insertion loss at 698 - 960 MHz
V.S.W.R. at 698 - 960 MHz
Attenuation
698 - 960 MHz
0.50 dB max. (-40～+85℃）
1.4 max.
15 dB min. (1554 - 1580 MHz)
25 dB min. (1710 - 2110 MHz)
25 dB min. (2110 - 2155 MHz)
25 dB min. (2155 - 2690 MHz)
12 dB min. (2155 - 7830 MHz)
50Ω
Impedance
High band
Pass band frequency 1
Pass band frequency 2
Insertion loss at 1710 - 2170 MHz
Insertion loss at 2500 - 2690 MHz
V.S.W.R. at 1710 - 2170 MHz
V.S.W.R. at 2500 - 2690 MHz
Attenuation
1710 - 2170 MHz
2500 - 2690 MHz
0.50 dB max. (-40～+85℃）
0.55 dB max. (-40～+85℃）
1.4 max.
1.8 max.
17 dB min. (0.3 - 960 MHz)
50Ω
Impedance
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
1
158
■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS
FI 212P082935
Low band
Pass band frequency
Insertion loss at 698 - 960 MHz
V.S.W.R. at 698 - 960 MHz
Attenuation
698 - 960 MHz
0.50 dB max. (-40～+85℃）
1.4 max.
15 dB min. (1554 - 1580 MHz)
25 dB min. (1710 - 2110 MHz)
25 dB min. (2110 - 2155 MHz)
25 dB min. (2155 - 2690 MHz)
12 dB min. (2155 - 7830 MHz)
50Ω
Impedance
High band
Pass band frequency 1
Pass band frequency 2
Insertion loss at 1710 - 2170 MHz
Insertion loss at 2500 - 2690 MHz
V.S.W.R. at 1710 - 2170 MHz
V.S.W.R. at 2500 - 2690 MHz
Attenuation
1710 - 2170 MHz
2500 - 2690 MHz
0.50 dB max. (-40～+85℃）
0.55 dB max. (-40～+85℃）
1.4 max.
1.8 max.
17 dB min. (0.3 - 960 MHz)
50Ω
Impedance
FI 212P089208
Low band
Pass band frequency
Insertion loss at 698 - 960 MHz
698 - 960 MHz
0.27 dB max. (+25℃）
0.32 dB max. (-40～+85℃）
2.0 max.
V.S.W.R. at 698 - 960 MHz
Attenuation
13 dB min. (1710 - 2170 MHz)
50Ω
Impedance
High band
Pass band frequency
Insertion loss at 1710 - 2170 MHz
1710 - 2170 MHz
0.45 dB max. (+25℃）
0.55 dB max. (-40～+85℃）
2.0 max.
V.S.W.R. at 698 - 960 MHz
Attenuation
19 dB min. (698 - 960 MHz)
50Ω
Impedance
FI 212P089213
Low band
Pass band frequency
Insertion loss at 698 - 960 MHz
698 - 960 MHz
0.27 dB max. (+25℃）
0.32 dB max. (-40～+85℃）
2.0 max.
V.S.W.R. at 698 - 960 MHz
Attenuation
13 dB min. (1710 - 2170 MHz)
50Ω
Impedance
High band
Pass band frequency
Insertion loss at 1710 - 2170 MHz
1710 - 2170 MHz
0.45 dB max. (+25℃）
0.55 dB max. (-40～+85℃）
2.0 max.
V.S.W.R. at 698 - 960 MHz
Attenuation
19 dB min. (698 - 960 MHz)
50Ω
Impedance
FI 212P085909
Low band
Pass band frequency
Insertion loss at 698 - 960 MHz
698 - 960 MHz
0.70 dB max. (+25℃）
0.75 dB max. (-30～+85℃）
1.6 max.
V.S.W.R. at 698 - 960 MHz
Attenuation
19 dB min. (1558 - 1570 MHz)
20 dB min. (1570 - 1580 MHz)
19 dB min. (1580 - 1610 MHz)
50Ω
Impedance
High band
Pass band frequency 1
Pass band frequency 2
Pass band frequency 3
Insertion loss at 1558 - 1570 MHz
1558 - 1570 MHz
1570 - 1580 MHz
1580 - 1610 MHz
0.75 dB max. (+25℃）
0.85 dB max. (-30～+85℃）
0.70 dB max. (+25℃）
0.80 dB max. (-30～+85℃）
0.70 dB max. (+25℃）
0.80 dB max. (-30～+85℃）
1.6 max.
Insertion loss at 1570 - 1580 MHz
Insertion loss at 1580 - 1610 MHz
V.S.W.R. at 1558 - 1570 MHz
V.S.W.R. at 1570 - 1580 MHz
V.S.W.R. at 1580 - 1610 MHz
Attenuation
1.6 max.
1.6 max.
35 dB min. (698 - 824 MHz)
42 dB min. (824 - 894 MHz)
25 dB min. (894 - 960 MHz)
50Ω
Impedance
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
1
159
■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS
FI 212P085912
Low band
Pass band frequency
698 - 960 MHz
Insertion loss at 698 - 960 MHz
0.70 dB max. (+25℃）
0.75 dB max. (-30～+85℃）
1.6 max.
V.S.W.R. at 698 - 960 MHz
Attenuation
19 dB min. (1558 - 1570 MHz)
20 dB min. (1570 - 1580 MHz)
19 dB min. (1580 - 1610 MHz)
50Ω
Impedance
High band
Pass band frequency 1
Pass band frequency 2
Pass band frequency 3
Insertion loss at 1558 - 1570 MHz
1558 - 1570 MHz
1570 - 1580 MHz
1580 - 1610 MHz
0.75 dB max. (+25℃）
0.85 dB max. (-30～+85℃）
0.70 dB max. (+25℃）
0.80 dB max. (-30～+85℃）
0.70 dB max. (+25℃）
0.80 dB max. (-30～+85℃）
1.6 max.
Insertion loss at 1570 - 1580 MHz
Insertion loss at 1580 - 1610 MHz
V.S.W.R. at 1558 - 1570 MHz
V.S.W.R. at 1570 - 1580 MHz
V.S.W.R. at 1580 - 1610 MHz
Attenuation
1.6 max.
1.6 max.
35 dB min. (698 - 824 MHz)
42 dB min. (824 - 894 MHz)
25 dB min. (894 - 960 MHz)
50Ω
Impedance
FI 168P157519
Low band
Pass band frequency 0
Pass band frequency 1
Pass band frequency 2
Insertion loss at 824 - 960 MHz
824 - 960 MHz
1558 - 1585 MHz
1585 - 1610 MHz
0.50 dB max. (+25℃）
0.60 dB max. (-40～+85℃）
0.40 dB max. (+25℃）
0.50 dB max. (-40～+85℃）
0.45 dB max. (+25℃）
0.55 dB max. (-40～+85℃）
2.0 max.
Insertion loss at 1558 - 1585 MHz
Insertion loss at 1585 - 1610 MHz
V.S.W.R. at 824 - 960 MHz
V.S.W.R. at 1558 - 1585 MHz
V.S.W.R. at 1585 - 1610 MHz
Attenuation
2.0 max.
2.0 max.
13 dB min. (2400 - 2500 MHz)
50Ω
Impedance
High band
Pass band frequency
Insertion loss at 2400 - 2500 MHz
2400 - 2500 MHz
0.60 dB max. (+25℃）
0.70 dB max. (-40～+85℃）
2.0 max.
V.S.W.R. at 2400 - 2500 MHz
Attenuation
12 dB min. (824 - 960 MHz)
23 dB min. (1558 - 1585 MHz)
20 dB min. (1585 - 1610 MHz)
50Ω
Impedance
FI 168P157525
Low band
Pass band frequency 0
Pass band frequency 1
Pass band frequency 2
Insertion loss at 824 - 960 MHz
824 - 960 MHz
1558 - 1585 MHz
1585 - 1610 MHz
0.50 dB max. (+25℃）
0.60 dB max. (-40～+85℃）
0.40 dB max. (+25℃）
0.50 dB max. (-40～+85℃）
0.45 dB max. (+25℃）
0.55 dB max. (-40～+85℃）
2.0 max.
Insertion loss at 1558 - 1585 MHz
Insertion loss at 1585 - 1610 MHz
V.S.W.R. at 824 - 960 MHz
V.S.W.R. at 1558 - 1585 MHz
V.S.W.R. at 1585 - 1610 MHz
Attenuation
2.0 max.
2.0 max.
13 dB min. (2400 - 2500 MHz)
50Ω
Impedance
High band
Pass band frequency
Insertion loss at 2400 - 2500 MHz
2400 - 2500 MHz
0.60 dB max. (+25℃）
0.70 dB max. (-40～+85℃）
2.0 max.
V.S.W.R. at 2400 - 2500 MHz
Attenuation
12 dB min. (824 - 960 MHz)
23 dB min. (1558 - 1585 MHz)
12 dB min. (1585 - 1610 MHz)
50Ω
Impedance
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
1
160
■ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS
FI 168W1697B1
Pass band frequency
699 - 2690 MHz
Insertion loss at 699 - 960 MHz
0.15 dB max. (+35~+85℃）
0.1 dB max. (+15~+35℃）
0.1 dB max. (-20～+15℃）
0.25 dB max. (+35~+85℃）
0.2 dB max. (+15~+35℃）
0.2 dB max. (-20～+15℃）
0.38 dB max. (+35~+85℃）
0.28 dB max. (+15~+35℃）
0.28 dB max. (-20～+15℃）
0.1 dB max. (699 - 746 MHz)
0.1 dB max. (791 - 862 MHz)
0.1 dB max. (824 - 960 MHz)
0.1 dB max. (1710 - 2170 MHz)
0.1 dB max. (2500 - 2690 MHz)
28.1～29.5 dB (699MHz）
25.8～27.2 dB (915MHz)
20.7～22.1 dB (1710MHz)
19.9～21.3 dB (1880MHz)
19.3～20.7 dB (2025MHz)
18.3～19.7 dB (2300MHz)
17.1～18.5 dB (2690MHz)
Insertion loss at 1000 - 2025 MHz
Insertion loss at 2110 - 2690 MHz
Ripple
RF Coupling
Coupling ration missmatch between Coupler
branch 1 and Coupler branch 2
-1～1 dB (699 - 2690 MHz)
Directivity
Impedance
18 dB min. (699 - 2690 MHz)
50 Ω
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
1
161
MULTILAYER CERAMIC DEVICES / DIPLEXERS / 2 BRANCH COUPLER
■PACKAGING
①Minimum Quantity
Type
212B
Embossed tape / Paper tape [pcs]
3000
212L
212C
212P
168B
168L
4000
168D
168P
168L-G Series
168W
5000
8000
105B
10000
105L
②Tape Material
●Embossed Tape
●Card Board Cattier Tape
Top tape
Top tape
Base tape
Sprocket hole
Chip cavity
Sprocket hole
Bottom tape
Base tape
Chip cavity
Chip Filled
Chip
●Taped package
Type (EIA)
Thickness
Standard Quantity [pcs]
mm (inch)
212B
212L
0.90 typ.（0.035）
0.45 typ.（0.018）
0.90 typ.（0.035）
0.90 typ.（0.035）
0.45 typ.（0.018）
0.60 typ.（0.024）
0.45 typ.（0.018）
0.45 typ.（0.018）
0.60 typ.（0.024）
0.45 typ.（0.018）
0.60 typ.（0.024）
0.60 typ.（0.024）
0.45 typ.（0.018）
0.30 typ.（0.0118）
0.30 typ.（0.0118）
212C
3000
212P
212C-0.5
212C-0.7
168B
168L-0.5
168L-0.65
168D
4000
168P
168L-G Series
168W
5000
8000
105B
10000
105L
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipfilter_pack_e-E06R01
③Taping Dimensions
●Embossed tape 0.315 inches wide
(212B Type, 212C Type, 212C-0.7 Type, 212P Type）
1.75±0.1
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
(0.069±0.004）
Sprocket hole
A
B
4.0±0.1
(0.157±0.004)
2.0±0.05
F
(0.079±0.002)
Unit：mm（inch）
Insertion Pitch
Chip cavity
Tape Thickness max.
Type（EIA）
212B
A
B
F
K
T
0.3
1.55±0.2
2.3±0.2
4.0±0.1
1.6
（0.061±0.008）
1.55±0.2
（0.091±0.008）
2.3±0.2
（0.157±0.004）
4.0±0.1
（0.063）
1.6
（0.012）
0.3
212C
（0.061±0.008）
1.55±0.2
（0.091±0.008）
2.3±0.2
（0.157±0.004）
4.0±0.1
（0.063）
1.3
（0.012）
0.3
212C-0.7
212P
（0.061±0.008）
1.55±0.2
（0.091±0.008）
2.3±0.2
（0.157±0.004）
4.0±0.1
（0.051）
1.6
（0.012）
0.3
（0.061±0.008）
（0.091±0.008）
（0.157±0.004）
（0.063）
（0.012）
Unit：mm（inch）
●Paper tape 0.315 inches wide
(212L Type, 212C-0.5 Type, 168B Type, 168L Type, 168W Type, 168D Type , 168P Type, 168L-G Series, 105B Type, 105L Type）
1.75±0.1
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
(0.069±0.004）
Sprocket hole
T
A
B
4.0±0.1
(0.157±0.004)
2.0±0.05
F
(0.079±0.002)
Unit：mm（inch）
Insertion Pitch
Chip cavity
Tape Thickness max.
T
Type（EIA）
212L
Ａ
Ｂ
Ｆ
1.55±0.2
2.3±0.2
（0.091±0.008）
2.3±0.2
4.0±0.1
0.65
（0.061±0.008）
1.55±0.2
（0.157±0.004）
4.0±0.1
（0.026）
0.3
212C-0.5
168B
（0.061±0.008）
1.00±0.05
（0.091±0.008）
1.80±0.05
（0.157±0.004）
4.0±0.1
（0.012）
0.55
（0.039±0.002）
1.00±0.05
（0.071±0.002）
1.80±0.05
（0.157±0.004）
4.0±0.1
（0.022）
0.55
168L
（0.039±0.002）
1.00±0.05
（0.071±0.002）
1.80±0.05
（0.157±0.004）
4.0±0.1
（0.022）
0.55
168W
（0.039±0.002）
1.00±0.05
（0.071±0.002）
1.80±0.05
（0.157±0.004）
4.0±0.1
（0.022）
0.55
168D
（0.039±0.002）
0.95±0.05
（0.071±0.002）
1.80±0.05
（0.157±0.004）
4.0±0.1
（0.022）
0.80
168P,
168L-G Series
（0.037±0.002）
0.62±0.03
（0.071±0.002）
1.12±0.03
（0.157±0.004）
2.0±0.05
（0.031）
0.45
105B
105L
（0.024±0.001）
0.62±0.03
（0.044±0.001）
1.12±0.03
（0.079±0.002）
2.0±0.05
（0.018）
0.45
（0.024±0.001）
（0.044±0.001）
（0.079±0.002）
（0.018）
Unit：mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipfilter_pack_e-E06R01
④Leader and Blank Portion
⑤Reel size
t
E
C
B
A
R
D
W
A
B
C
D
E
R
φ178±2.0
φ50min.
φ13.0±0.2
φ21.0±0.8
2.0±0.5
1.0
（φ7.01±0.079）
（φ1.97 min.）
（φ0.512±0.008）
（φ0.827±0.031）
（0.079±0.020）
t
W
8mm width tape
（0.315 inches width）
12mm width tape
2.5max.
10±1.5
（0.098max.）
2.5max.
（0.394±0.059）
14±1.5
（0.472 inches width）
（0.098max.）
（0.551±0.059）
Unit：mm（inch）
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1～0.7N in the direction of the arrow as illustrated below.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipfilter_pack_e-E06R01
MULTILAYER CERAMIC DEVICES / DIPLEXERS / 2 BRANCH COUPLER
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
－30～＋85℃
2. Storage Temperature Range
Specified Value
－30～＋85℃
※Note : －20 to +40℃ in taped packaging
Test Methods and
Remarks
3. Resistance to Flexure of Substrate
Specified Value
No mechanical damage.
Warp
: 2mm
Testing board
Thickness
: Glass epoxy-resin substrate
: 0.8mm
Test Methods and
Remarks
4. Adhesion of Electrode
Characteristics
: shall satisfy the electrical characteristics.
: No significant abnormality.
Specified Value
Appearance
Applied force
Duration
: 5N
: 10 sec.
Test Methods and
Remarks
5. Solderability
Specified Value
75% or more of immersed surface of terminal electrode shall be covered with fresh solder.
Solder temperature
Test Methods and Duration
Remarks Preconditioning
Immersion and Removal speed
: 230±5℃
: 4±1 sec
: Immersion into flux.
: 25mm/sec.
6. Resistance to Solder Heat
Characteristics
: shall satisfy the electrical characteristics.
: No significant abnormality.
Specified Value
Appearance
Preheating
: 150℃ for 2 min.
: 260±5℃
Solder temperature
Test Methods and Duration
Remarks Preconditioning
Immersion and Removal speed
Recovery
: 5±0.5 sec.
: Immersion into flux.
: 25mm/sec.
: 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipfilter_reli_e-E05R01
7. Thermal Shock
Specified Value
Characteristics
Appearance
: shall satisfy the electrical characteristics.
: No significant abnormality.
According to JIS C60068-2-14.
Conditions for 1 cycle
Step
Temperature (℃)
－40±3
Duration (min)
30±3
1
2
3
4
Room Temperature
85±2
Within 3
30±3
Test Methods and
Remarks
Room Temperature
Within 3
Number of cycles
Mounting method
Recovery
: 100
: Soldering onto PC board.
: 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
8. Humidity (steady state)
Characteristics
: shall satisfy the electrical characteristics.
: No significant abnormality.
Specified Value
Appearance
Temperature
: ＋40±2℃
Test Methods and Humidity
: 90～95%RH
Remarks
Duration
: 96hrs
Recovery
: 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
9. High temperature life test
Characteristics
: shall satisfy the electrical characteristics.
: No significant abnormality.
Specified Value
Appearance
Temperature
Duration
: ＋85±2℃
Test Methods and
Remarks
: 96hrs
Recovery
: 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
10. Low temperature life test
Characteristics
: shall satisfy the electrical characteristics.
: No significant abnormality.
Specified Value
Appearance
Temperature
Duration
: －40±2℃
Test Methods and
Remarks
: 96hrs
Recovery
: 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
Note on standard condition:
"standard condition" referred to herein is defined as follows :
5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement result :
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity and 86 to 106kPa of air
pressure.
Unless otherwise specified, all the tests are conducted under the "standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipfilter_reli_e-E05R01
MULTILAYER CERAMIC DEVICES / DIPLEXERS / 2 BRANCH COUPLER
■PRECAUTIONS
1. PCB Design
◆Land pattern design
Land pattern dimension examples
FI212B245025
FI212B Type
FI212L Type
FI168D Type
FI212B190223
Unit：mm
Unit：mm
Unit：mm
Unit：mm
Unit：mm
Unit：mm
FI168B/L Type
FI168P Type
FI212C Type
FI212P Type
Technical
considerations
Unit：mm
Unit：mm
Unit：mm
FI212 P3960A4
FI105B/L Type
FI168W Type
FI212P****G* Type
0.6500
0.3500
0.3500
0.5000
単位：mm
Unit：mm
Unit：mm
2. Soldering
◆Conditions for Reflow soldering (for reference)
【Reflow Profile】
300
300
200
100
0
Peak
260℃ Max.
Within 10sec.
Preheating
230℃
Within 10sec.
60sec. 60sec
Min.
Min.
200
100
0
Slow
Slow cooling
※ Components should be preheated to within 100
to 130℃ from soldering temperature.
cooling
Technical
considerations
※ Assured to be reflow soldering for 2 times.
Note : The above profiles are the maximum
allowable soldering condition, therefore
these profiles are not always
recommended.
Heating above
230℃
40sec. Max.
Preheating150℃
60sec. Min.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipfilter_prec_e-E06R01
3. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible.
・ Recommended conditions
Ambient temperature : －20～＋40℃
Precautions
Humidity : Below 70%RH
The ambient temperature must be kept below 30℃.
Even under ideal storage conditions, the solderbility of electrodes decreases gradually, so filters should be mounted within 6 months
from the time of delivery.
・ The packaging material should be kept where no chlorine or sulfur exists in the air.
◆Storage
Technical
1. If the parts are stocked in a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of
terminal electrodes and deterioration of taping/ packaging materials may take place. For this reason, components should be used within 6
months from the time of delivery. If exceeding the above period, please check the solderability before using the filter.
considerations
■ Please contact of our offices for further details of specifications.
All of the standard values listed here are subject to change without notice.
Therefore, please check the specifications carefully before use.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipfilter_prec_e-E06R01
相关型号：
©2020 ICPDF网 联系我们和版权申明